Introducing the new S80 series of AVA smart quarter-turn electric actuator. The new smart actuator from AVA is a compact actuator offering 80Nm torque output, with an IP67 PC+PET plastic housing, manual override via mechanical device and local control from touch button, OLED 1.3” colour screen with actuator status display, input and output and fault display.
The AVA S80 can be upgraded to a Failsafe function using an internal Capacitor Failsafe system. This is an internal capacitor can achieve Failsafe Open or Failsafe Closed on loss of power. We can also offer Hi-Speed series for quick actuation time of 0-90 degrees in around 5 seconds.
Offering ISO5211 direct mount capability with F05/07 x 17mm mounting, the S80 series offers a number of function but as standard can offer speed control, local control, position adjustment, 3 position setting for 0-90-180-degree operation and more.
In addition, it offers On/Off function, Modulating, Failsafe, Modulating Failsafe, Hi Speed, BUS Communication and Timer options. Now available in EXD series for hazardous use also.
* Please note that if you have previously purchased a 60 Series actuator (B60 or S60) this has now been replaced by our 80 Series following the launch of our new 50Nm actuator series. The 80 Series is a direct replacement, like for like just with more torque output.
Standard Open/Close, power to open, power to close. Stays put on loss of power.
Fail closed on loss of power. Internal super capacitor is charged whilst power is applied, when removed, the capacitor will close the actuator. Fail open also available
Fast acting open and closing time available, as standard the run time is typically 50% less than the standard run time. For 10, 20 and 50Nm series, 1 second is available using 24VDC motor.
Modulating control via digital encoder and position sensor. High levels of accuracy available with programable feature such as deadzone. 4-20ma, 0-10V, 2-10V, 0-20mA.
Modulating control via 4-20ma, 0-10V or 2-10V with failsafe functionality for incase power is lost. Internal super capacitor can be used to fail closed, open or to a mid position.
Modulating control via 4-20ma, 0-10V or 2-10V with hi speed opening and closing. For example, the actuator can move from 4ma to 20ma in 1 second (series 10.20 and 50 only on DC motor).
Via our SmartMenu, the Timer series allows you to set a 24/7 timer schedule of up to 60 actuations (open/close movements) per day. Intelligent functionality without the need of a PLC.
Modbus RS485/RTU and CANBus as standard are avialable to connect the actuator to a BUS system. You are able to read the actuator position, any errors and more via the BUS communication protocol. We are also able to offer Modbus TCP/IP on request.
Other protocols to follow.
Multi Turn series is designed for non rising stem valves such as diaphragm valves, gate valves and knife gate valves. You are able to set via the SmartMenu the number of turns. See datasheet on our MT series for more information.
Configurable via the SmartMenu, you are able to set 3 position operation. For example, you can set open, close and a mid position. Or you could set 0-90-180 degree for a 3 way valve.
Via our SmartMenu, our smart actuators have local control as standard. A password protected menu allows the user to drive the actuator open or close via the push buttons located on the actuator screen. This is an electronic manual override when power is applied.
All our actuators have open and close feedback. If using a Basic actuator this is via mechanical switches. If using our Smart series, this is achieved via electronic relays. Note that our Modulating actuators do not have end of travel feedback, they have a modulating output for example, 4-20ma input + output.
All our Smart actuators have a SmartMenu with a password protected firmware onboard. Once the password is entered, you are able to change parameters such as speed, working angle, failsafe position, 3 position setup and much more.
All actuators have manual override as standard. Each actuator is supplied with an allen key to be used when power is NOT applied. You must disconnect power to use the mechanical manual override. For Smart series you also have Local Control manual override.
With a choice of either an AVA basic providing simple on-off functionality, or an AVA smart actuator providing complex functions, offered in a truly compact housing, select your AVA electric actuator from the ranges below: