The AVA B110 is our Basic 110Nm entry-level electric actuator. The B110 Series offers 110Nm torque output as standard, with an IP67 rated ABS housing, manual override, end of travel limit switches and internal heater. The actuator is to be used for ball and butterfly valves and has an ISO 5211 with F05/07 x 17mm mounting for direct mount to valves. The standard function is On Off.
The AVA B110 is also available as a Failsafe function using internal Super Capacitors. Our failsafe actuators are supplied fail closed as standard with an option of fail open on request.
Hi Speed option available for 5-6 second run time open and close.
See our S110 Smart Series for Modulating function and other ‘Smart’ features such as Modbus, Multi Turn and Timer.
Standard Open/Close, power to open, power to close. Stays put on loss of power.
Fail closed on loss of power. Internal super capacitor is charged whilst power is applied, when removed, the capacitor will close the actuator. Fail open also available
Fast acting open and closing time available, as standard the run time is typically 50% less than the standard run time. For 10, 20 and 50Nm series, 1 second is available using 24VDC motor.
All our actuators have open and close feedback. If using a Basic actuator this is via mechanical switches. If using our Smart series, this is achieved via electronic relays. Note that our Modulating actuators do not have end of travel feedback, they have a modulating output for example, 4-20ma input + output.
All actuators have manual override as standard. Each actuator is supplied with an allen key to be used when power is NOT applied. You must disconnect power to use the mechanical manual override. For Smart series you also have Local Control manual override.
With a choice of either an AVA basic providing simple on-off functionality, or an AVA smart actuator providing complex functions, offered in a truly compact housing, select your AVA electric actuator from the ranges below: